background image

Weak reception

Out of range or insufficient

Test reception by moving the transmitter

signal

and/or receiver to different locations through-
out the house. Relocate the transmitter
and/or receiver.

Low charge battery 

Use AC adaptor with receiver in base to

in receiver

monitor and charge battery.

AC adaptor cord(s) not fully

Fully extend AC adaptor cord(s).

extended

Improper antenna position

Make sure antennas are pointing upward.

Interference

Signal interference due

Change channel switch on both transmitter

(buzzing, static, etc.)

to other nursery monitors or

and receiver to the other channel.

cordless telephones, etc.

Identify and eliminate source of interference.
Do not use two nursery monitors at the same
time in the same house.

Channel switches not on

Check channel switch on transmitter and 

same setting

receiver to be sure they are on the same
channel.

Feedback

Receiver is too close to the

Move receiver further away from transmitter.

(squealing or whistling)

transmitter

Volume is set too high

Lower volume on the receiver.

12

PROBLEM

PROBABLE CAUSE

SOLUTION

If you have any questions about this product:

In Canada,

call 

1-800-567-7724,

or write to:

Mattel/Fisher-Price, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.

In Great Britain,

telephone 01734 770488.

In Australia,

call the Fisher-Price Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to:

Fisher-Price, Mattel Pty. Limited, 461 Plummer Street, Port Melbourne,Victoria 3207.

Summary of Contents for 71562













Reviews: