• Do not use two nursery monitors at the same time in
the same house.
• Never use the transmitter or receiver near water. For
example, do not use near a bathtub, washbowl, laundry
tub, kitchen sink, or in a wet basement, etc.
• Place the transmitter, receiver and AC adaptors where
there is adequate ventilation.To prevent overheating,
keep the transmitter, receiver and AC adaptors away
from heat sources such as radiators, heat registers,
direct sunlight, stoves, amplifiers, or other appliances
which produce heat.
• Avoid short-circuiting the contact terminals in the base.
• Fully charge the battery before long-term storage.
• Always remember that you are using public airwaves
when you use the Cordless Nursery Monitor.
Conversations, even from rooms near the transmitter,
may be broadcast to other nursery monitors, radios,
cordless telephones, or scanners outside your home.
To protect the privacy of your home, always turn the
transmitter off when not in use.
• Any modification of the transmitter or the receiver
will violate FCC compliance and can void the user’s
authority to operate the equipment.
• The Cordless Nursery Monitor is not designed for
consumer repair. If your Cordless Nursery Monitor is
not working properly, please refer to the Problems and
Solutions Guide beginning on page 10.
• Please read and follow all instructions in this booklet
and on the product for proper use of this product.
• This product is not intended to be used as a medical
monitor and its use should not replace adult supervi-
sion. It is important that an adult stay within the range
of the Cordless Nursery Monitor at all times during use.
• This product does not detect non-audible functions,
such as a child moving.
• To prevent entanglement, never place the transmitter
in a crib or playpen. Place the transmitter, receiver and
AC adaptor cord(s) out of reach of baby.
• To prevent entanglement, do not use extension cords
with the AC adaptors.
• Use only the AC adaptors provided with your Cordless
Nursery Monitor. Use of any others may damage the
transmitter and/or receiver.
• Insert the AC adaptor plugs into standard household
current (120v AC outlets).
• Position AC adaptor cords so that they are not walked
on or pinched by items placed upon or against them.
• If you are using the Cordless Nursery Monitor at
bedside, be sure to use the receiver in the base to
prevent battery power from running low and ensure
continuous monitoring.
CAUTION
This product cannot replace responsible
adult supervision of a child.
Important Information
B
3
