29
CHANGING PRE-SET OPTIONS
Option adjustment mode
This allows you to change the
CONTROLLED COLD
default setting wash temperature to
COLD
TAP
. If your incoming cold water temperature is very low and you choose to do
a
COLD
TAP
wash, the wash may be less effective.
To enter Option Adjustment mode:
The cold
WASH TEMP
icon will flash on and off.
This is the default setting, where the machine
uses the internal heater to heat the water
to 20°C.
Press the
WASH TEMP
button once, the
cold icon will stop flashing, indicating that
the temperature of the water will now be
the same as the incoming water from the
cold supply.
1
2
3
Turn your washer on at the wall but do
not press
.
Press and hold the
and
WASH TEMP
buttons together for three seconds. You will
hear a quick beep and
will appear on
the screen indicating you have entered option
adjustment mode.
If you always use
COLD
or
CONTROLLED COLD
water, we recommend that a warm or hot
wash be used regularly, eg every fifth wash should be at least 40°C or above. Warm water
is needed to help maintain the cleanliness of your washer.
Press to save the setting.
Your washer will automatically remember
your changes for all future washes you do on
this cycle.
4
+
