27
Required components/tools:
●
●
Ruler
●
●
1x Barbed plug
!6
DUAL INSTALLATION
1
Roll the second appliance into the cabinetry side by side with the first appliance. (
A
)
2
Before rolling the appliance, insert a barbed plug into a large hole on the cabinetry side of
the second appliance to protect the inside of the cabinetry from being damaged by screws
on the side of the appliance (
B
).
3
Continue rolling the appliance into the cabinetry until the anti-tip bracket overlaps
[minimum 7 1/8” (180mm)] the back top surface of the appliance. (Refer to ‘Attach the anti-
tip bracket’).
4
Check the clearance between the floor and the feet. Ensure the rollers of the appliance can
roll freely on the floor.
5
Align the top cap of the second appliance flush with the central spacer and top cap of
first appliance (
C
).
C
Positioning and aligning the second appliance inside the cabinetry
6
Mark the step (
D
) of each alignment gauge based on the thickness of the door panel to be
installed to the door.
7
Align the marked steps of the gauges flush with the edges of the cabinetry side walls.
– Place a ruler on the steps of the alignment gauges to check if they are in line (
E
)
relative to the thickness of the door panel.
8
Check if the gaps between appliance and cabinetry side wall are even.
E
D
A
B
