41
@5
OPTIONAL — CHANGING OVER DOOR HINGES
Removing the top door hinge
1
Rotate the top hinge (
A
)
outwards and remove
the top hinge pocket cover (
B
)
using the flat
head screwdriver in the slot of the cover.
2
Remove the hinge by unscrewing the M5x12
pan head screws (2x) (
C
), and set aside for
later use.
3
Remove the hinge pocket and top alcove
bracket by unscrewing M5x12 pan head screws
(2x) (
D
)
from the hinge pocket.
4
Remove the top hinge bracket and spacer (
E
)
by unscrewing the M5x12 countersunk screws
(2x) from the top hinge bracket.
5
For the non-hinge side, remove the top alcove
bracket by unscrewing the M5x12 pan head
screws (2x) (
F
).
(Not applicable for RS18).
Removing the bottom door hinge
6
Rotate the bottom hinge (
G
)
outwards and
remove bottom hinge pocket cover (
H
)
using a
flat head screwdriver in the slot.
7
Remove the hinge by unscrewing the M6x16
countersunk screws (2x) (
I
).
8
Open the water filter hatch on the bottom
(fixed) grille and unscrew the #8x16 screw (
J
)
while holding the grille in place.
9
Remove the bottom grille by unscrewing the
#8x16 screws (
K
) from the bottom left and
right of the grille.
!0
Remove bottom hinge bracket by unscrewing
M6x16 countersunk screws (
L
).
IMPORTANT!
Do not remove plinth-to-cabinet retention
brackets!
Required components/tools:
●
●
T20 star screwdriver
●
●
Flat head screwdriver
A
G
E
C
D
F
J
L
B
K
I
K
H
Do not remove!
Do not remove!
