15
!0
ELECTRICAL AND PLUMBING
ELECTRICAL SPECIFICATIONS
FREEZER
REFRIGERATOR
Supply
115VAC, 60Hz
115VAC, 60Hz
Service
10 amp circuit
10 amp circuit
Outlet
3-prong grounding-type
3-prong grounding-type
Power cord (excluding plug)
86” (2190mm)
86” (2190mm)
PLUMBING SPECIFICATIONS
FREEZER
REFRIGERATOR
Supply
1/4” (6mm) comp. Stainless steel braided hose
NA
Pressure kPa (psi)
min 150 (22) / max 827 (120) @ 68°F (20°C)
NA
Water inlet hose
83 1/2” (2121mm)
83 1/2” (2121mm)
A
B
B
C
Left side of cavity
Electrical and water connections must be within this space if located
behind the appliance and must not protrude from the back wall.
REAR OF CAVITY
ELECTRICAL AND PLUMBING DIMENSIONS
inches (mm)
A
Overall height of supply area
9” (229)
B
Width from the side of the cabinetry
1/2” (13)
C
Height at sides of supply area
5” (127)
Note: Dimensions are based on minimum depth of cavity.
Image shown is for single install.
For dual install, each appliance should have a separate power supply connection with only the
freezer having a water connection.
Floor
Note: We recommend to use an isolating switch that is easily accessible to the user after the
appliance is installed.
WARNING!
Electric shock hazard! Assume all parts live. Disconnect supply before servicing
and installation.
