36
@2
INSTALL TOE KICK GRILLE
Adjusting the toe kick grille
1
Loosen the cap screws of the adjustment brackets from both sides of the plinth using a
hex key (
A
).
2
Adjust the toe kick to the desired depth by moving it forward/backward (
B
).
3
Re-tighten the cap screws of the adjustment brackets on both sides using the hex key.
Required components/tools:
●
●
Hex key (supplied)
●
●
1x Fixed (top) grille
●
●
1x Bottom (movable) grille
●
●
8x16mm Pan head screws
IMPORTANT!
●
●
For toe kick heights 4 1/2” – 5” (114 – 127mm), shorten the lower grille by cutting along the
vertical ribs.
●
●
For 2” (51mm) toe kick height, an additional lower grille can be ordered.
●
●
For toe kick heights greater than 5” (127mm), lower grille is not required.
●
●
Refer to ‘Door and toe kick panel dimensions’ for more information.
5
Install the bottom
(movable) grille (
E
) with
8x16mm pan head screws.
B
A
Toe kick and toe kick grille
complete installation
●
●
For toe kick heights 4 1/2” – 5”
(114 – 127mm), shorten the
bottom grille by cutting along
the vertical ribs (
F
).
F
Attach the top and bottom grilles
4
Install the top (fixed) grille
(
C
) with 8x16mm pan head
screws and reinstall bottom
hinge pocket cover (
D
).
C
D
E
