33
CHANGING PRE-SET OPTIONS
Controlled cold
WashSmart™ model only
If your cold water temperature is very low you will not get a very effective wash. The
‘Controlled Cold’ option solves this problem by adding a small amount of hot water
to raise the temperature of the wash to approximately 20°C. We have called this
‘Controlled Cold’.
1
When in option adjustment mode, select ‘Cold’ wash temperature.
2
The wash progress lights show the temperature adjustment possible.
●
●
When the first progress light (from the left) is on, the washer will fill with cold
water only.
●
●
Press the
button to select the second light (from the left) and your washer will
control the temperature to approximately 20°C. Each following light approximately
equals a 1°C temperature rise.
Note: if you always use ‘Cold’ or ‘Controlled Cold’ water, we recommend that a ‘Warm’
or ‘Hot’ wash be used regularly, eg every 5th wash should be at least a warm one.
Changing the cold wash temperature setting
End of cycle beeps
WashSmart™ model only
The beeps signalling the end of the cycle can be increased or decreased. Press the
options button to increase the number of beeps or press again for no beeps to sound at
the end of the cycle.
Auto water fill level
WashSmart™ model only
If you are not satisfied with the level that
your washer fills to on ‘Auto’ water level,
you can increase or decrease the fill level
that ‘Auto’ will select.
Note: if you feel there is not enough water
for the load, we recommend you check by
pausing the washer and pushing the clothes
down to see how much spare water is at
the bottom of the bowl. Clothes often float
and your washer can sense the water under
the clothes.
LIGHT ON
OPTION
Favourite
less water
Easy iron
factory setting
Allergy
more water +
Hand wash
more water ++
Heavy duty
more water +++
