9
INSTALLATION INSTRUCTIONS
Levelling instructions
It is IMPORTANT to level the washer to ensure good spin performance.
Note: after levelling, the corners of the washer should be clear of the floor and the
washer must not rock in any direction.
Levelling your washer
1
Move the washer to its final position (we suggest a
minimum clearance of 20mm each side).
2
Adjust all four feet (wind down) so the washer is level
and does not rock.
To check if your washer is level:
1
Look down on the wash bowl and make sure it sits slightly forward of centre (see
Diagram 1).
2
Close the lid.
3
Visually check that the lid fits evenly on both sides. If it does not look like the diagram
in the middle, adjust one of the feet slightly until it matches. The diagram on the top
and bottom are not correct (see Diagram 2).
To assess levelling, check lid alignment
Lid alignment
Lid
Topdeck
Lid
Lid
Topdeck
Topdeck
Wind right foot down
(out) to correct
Wind left foot down
(out) to correct
Diagram 1
Diagram 2
Correct
Incorrect
To check levelling look
down on the wash bowl
IMPORTANT!
If moving or transporting your washer in the future, ensure you tape the lid down
beforehand.
Adjusting the levelling feet
Adjustable feet
Cabinet corners
