62
ALERT CODES
What to do if an alert code is displayed
1
If the beeping hasn’t stopped already, touch the display and press the little audio
button in the bottom right to mute it.
2
Make a note of the alert code displayed. You may need this information.
3
Follow the instructions on the screen to resolve the problem.
4
If you can fix the problem and the alert code does not reappear, you may continue
using your oven.
If you can’t fix the problem yourself or the alert code reappears and the problem persists:
wait until the cooling fans have stopped and the oven has completely cooled down, then
turn the power to the oven off at the wall and contact a Fisher & Paykel trained and
supported service technician or Customer Care with the alert code information.
If there is a problem, the oven will automatically suspend all oven functions, beep five times
and display an alert code.
IMPORTANT!
Do not turn off the mains power supply to the oven (wall switch) if you get an alert code,
unless the instructions in the chart following specifically instruct you to. There are cooling
fans within the oven which are needed to cool the oven’s components. Turning off the
power while the oven is too hot may damage the oven and its surrounding cabinetry.
ALERT CODE POSSIBLE CAUSES
WHAT TO DO
A1
The oven has
overheated.
•
Allow the oven to cool down.
•
Once the oven has cooled down and the door has
unlocked, the alert code will disappear. You can now use
the oven.
A2
Door lock error:
the door cannot
be locked after
you have started a
Self Clean cycle.
•
Turn the power to the oven off at the wall and on again.
•
Wait approximately 10 seconds. This will allow the door
lock to return to its initial position.
•
Set the clock. See ‘First use’ for instructions.
•
Try starting a Self Clean cycle again, making sure that you
close the door firmly. See ‘Using Self Clean’.
A3
Door lock error:
the door cannot
be unlocked after
a Self Clean cycle
has finished.
•
Turn the power to the oven off at the wall and on again.
•
Gently press the door a few times to help the door
lock disengage.
•
If this doesn’t help and the alert code reappears,
contact a Fisher & Paykel trained and supported service
technician or Customer Care.
F
+ number
Technical fault.
•
Note down the alert code.
•
Wait until the cooling fans have stopped and the oven
has completely cooled down.
•
Turn the power to the oven off at the wall.
•
Contact a Fisher & Paykel trained and supported service
technician or Customer Care.
Summary of Contents for OB24SDPT
