background image

36

Customer Care

Before you call for service or assistance…

Check the things you can do yourself.
Refer to your User Guide and check:

1

  Your appliance is correctly installed.

2

  You are familiar with its normal operation.

3

  You have read the problem solving section at the back of the book.

If after checking these points you still need assistance, please refer to your nearest Fisher & Paykel 
Authorised Repairer, or contact us through our local website listed on the back cover.

In New Zealand if you need assistance...*

Call your Fisher & Paykel retailer who is trained to provide information on your appliance, or if we 
can be of any further help, please contact our Customer Care Centre,

Toll Free:

 0800 FP CARE or 0800 37 2273  

Fax:

 (09) 273 0656

Email:

 [email protected]  

Postal address:

 PO Box 58732, Botany, Manukau 2163

If you need service...*

Fisher & Paykel has a network of independent Fisher & Paykel Authorised Repairers whose fully 
trained technicians can carry out any service necessary on your appliance. Your dealer or our 
Customer Care Centre can recommend a Fisher & Paykel Authorised Repairer in your area.

In Australia if you need assistance...*

Call the Fisher & Paykel Customer Care Centre and talk to one of our Customer Care Consultants.

Toll Free:

 1 300 650 590  

Fax:

 (07) 3826 9298

Email:

 [email protected]  

Postal Address:

 PO Box 798, Cleveland QLD 4163

If you need service...*

Fisher & Paykel has a network of qualified Fisher & Paykel Authorised Repairers responsible for 
servicing only Fisher & Paykel branded appliances. Our Customer Care Centre can recommend a 
qualified Fisher & Paykel Authorised Repairer in your area.

In Singapore if you need assistance...*

Please call our Fisher & Paykel Service line.

Phone:

 6741 0777

 

Fax:

 6547 0123 

Phone:

 6547 0100 

Postal address:

 150 Ubi Avenue 4,  

Email:

 [email protected] 

Sunlight Building #03-01A, Singapore 408825

*If you call, write or contact our website please provide: your name and address, model number, 
serial number, date of purchase and a complete description of the problem. This information is 
needed in order to better respond to your request for assistance.

Product details can be found on the top left hand side of the console or back panel of the 
washer cabinet.

Summary of Contents for FabricSmart









































Reviews: