18
Your machine left the factory with the Machine Stops Action set as the default.
To set your machine to Automatic Recovery:
■
■
Access the SETTINGS menu (refer to page 16).
■
■
Select OUT OF BALANCE RECOVERY.
■
■
Select ON.
■
■
Automatic Recovery is now activated.
End of Cycle Beeps
The beeps signalling the end of the cycle can be set to zero, five or fifteen.
■
■
Access the SETTINGS menu (refer to page 16).
■
■
Select END OF CYCLE BEEPS.
■
■
Use the scroll buttons to highlight the number of beeps you would prefer, then touch .
Reset Defaults
If you wish to reset all settings back to those that are set when your machine leaves our factory:
■
■
Access the SETTINGS menu (refer to page 16).
■
■
Select RESET DEFAULTS.
■
■
Select YES to reset to the factory default.
Display
Brightness
You can adjust the brightness of your display screen to suit your individual needs.
■
■
Access the SETTINGS menu (refer to page 16).
■
■
Select DISPLAY.
■
■
Select BRIGHTNESS.
■
■
Use the scroll buttons to increase or decrease the screen brightness.
■
■
Touch to confirm your selection and return to the SETTINGS menu.
Contrast
You can adjust the contrast of your display screen to suit your individual needs.
■
■
Access the SETTINGS menu (refer to page 16).
■
■
Select DISPLAY.
■
■
Select CONTRAST.
■
■
Use the scroll buttons to increase or decrease the screen contrast.
■
■
Touch to confirm your selection and return to the SETTINGS menu.
Press to exit the SETTINGS menu.
Adjusting the wash settings
