14
Wash Advance
Use WASH ADVANCE to advance the cycle or to start the cycle at a particular stage. This is a good
option if you only want to use part of the cycle, eg the rinse and spin, or prewash. Please refer to
page 22 for more detail.
Note: you can also access this option from the wash options screen (touch the button).
Spin
This option allows you to limit the spin speed to either fast (1000 rpm) or medium (670 rpm).
How Dirty
Some loads need a little more or a little less washing than others. Set this according to the
amount of soil in your load. This also gives you the option to set the HOW DIRTY level if you
missed setting it from the idle screen at the start, or have changed your mind (refer to page 8).
Delay Start
Delays the start of the wash cycle between
15 minutes and 18 hours. Scroll to choose
how long you want your machine to delay for.
Touch
to begin the countdown. To cancel
the countdown touch
again.
Note: be careful if using DELAY START for non-colourfast clothes that are damp, as the dye may
transfer and/or run.
Drip Dry
Selecting DRIP DRY will pause the washer at the end of the rinse, allowing you to remove
drip-dry garments before the washer goes into final spin. The washer will beep and display a
message to tell you that it is waiting for another instruction. Once items have been removed,
touch
to begin the spin.
Soak
The washer will soak for approximately 2 hours in the middle of the wash phase, then complete
the rest of the cycle. During soak the machine will agitate for a few seconds every minute. SOAK
will be shortened to approximately one hour if the SAVE TIME option is selected.
Save Time
SAVE TIME allows you to shorten the wash cycle for lightly soiled clothes. Selecting this option
reduces rinse, soak and spin times. To save more time, reduce the wash time by decreasing the
number of HOW DIRTY bars. SAVE TIME can be turned on or off at any time during the cycle.
Options
Fig.17 Selecting the DELAY START time
