INSTALLATION INSTRUCTIONS
14
Completing the installation
Installation test cycle
IMPORTANT!
Ensure the installation test cycle is completed before you dry any items in your dryer.
This checks your dryer is installed correctly and functioning properly prior to use.
1
Turn your dryer on by pressing ‘POWER’
.
2
Select the ‘Time Dry’ cycle for 30 minutes. Ensure the drum is empty and the door is
closed (you will hear it click shut).
3
Press , the drum will start rotating.
●
●
Observe the dryer for any problems.
●
●
The dryer will beep and display any faults on the screen if there are any problems.
Refer to ‘Fault codes’.
4
At the completion of the cycle open the door and check that there is warmth inside the
dryer. This indicates the dryer is operating normally.
IMPORTANT!
If there are any problems, you must address these before proceeding with normal use.
The dryer will automatically turn off at the end of the cycle if there are no problems.
Before you start, it is a good idea to go through the following checklist:
1
Has the packaging been removed?
2
Is the lint filter correctly in place?
3
Has the power cord been connected to an appropriate power supply and the power
turned on?
4
Have you performed the installation test cycle?
Product specifications
DE4560M
DE5060M
DE5060MU
DE6060M
DE7060M
Capacity (kg)*
4.5
5
6
7
DIMENSIONS (mm)
Width
600
600
600
600
Depth
481
571
571
571
Height
825
825
825
825
ELECTRICAL
Volts
220 – 240
220 – 240
220 – 240
220 – 240
Hz
50
50
50
50
Amps (maximum)
10
10
10
10
Rated Power (W)
1750
1750
1750
1770
* Capacity refers to the maximum
dry
weight of items the dryer can dry at any one time.
Rated capacity is determined by a countries performance standards, so similar dryers may have different
capacities for different markets.
