12
INSTALLATION INSTRUCTIONS
Electrical connection information for electric dryers
For direct wire connections:
!
WARNING!
Fire Hazard
●
●
Use 10 gauge copper wire.
●
●
Use a UL-listed strain relief.
●
●
Disconnect power before making electrical connections.
●
●
Connect neutral wire (white or center wire) to center terminal.
●
●
Ground wire (green or bare wire) must be connected to green ground
connector.
●
●
Connect remaining two supply wires to remaining two terminals.
●
●
Securely tighten all electrical connections.
●
●
Replace the terminal block cover.
●
●
Failure to do so can result in death, fire or electrical shock.
Grounding instructions
For a permanently connected dryer:
This dryer must be connected to a grounded metal, permanent wiring system, or an
equipment-grounding conductor must be run with the circuit conductors and connected
to the equipment-grounding terminal on the appliance.
WARNING!
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician, or service representative or
personnel, if you are in doubt as to whether the appliance is properly grounded.
SAVE THESE INSTRUCTIONS
