16
Your
AeroLogic™
or
AeroDry™
dryer has been designed so you can select how long you want the
clothes to dry for. So you know exactly when your clothes will be ready.
Using your dryer
1
Clean the lint filter before every load.
2
Load the clothes into the dryer and close the door.
3
Turning the dial clockwise, select the desired cycle and drying time. Push the dial in to start your
chosen cycle.
4
Try to remove the clothes from the dryer as soon as the cycle is completed to help
prevent creasing.
Note: the
AeroDry™
dryer will stop every 5–6 minutes during operation to allow clothes to
redistribute.
To pause/stop the dryer at anytime, pull the door open.
To restart, close the door and push the dial in.
In the event of a power failure, your dryer will not restart automatically when power resumes. We
recommend restarting the dryer as soon as the power comes back on.
Important!
If you wish to stop the dryer before the cycle is finished, you MUST remove the clothes IMMEDIATELY
and spread them out to cool. DO NOT leave the clothes in the dryer, or bunched up in a clothes basket.
Drying cycles
Your
AeroLogic™
or
AeroDry™
dryer has two drying cycles designed to take care of all your drying
needs.
■
■
The REGULAR cycle is for drying more durable fabric or garment types, eg cotton, denim.
Here the heater remains on until the airing phase of the cycle.
■
■
The DELICATE cycle is for drying delicates and synthetics.
Here the heater pulses on and off, so garments are dried at lower temperatures.
Fig. 16 Control panel – AeroLogic™ and AeroDry™ dryers
Note: turn the dial clockwise only.
AeroLogic™ and AeroDry™ dryers