10
Note: if you change mounting from upright to inverted or vice versa the dryer must be cleaned
internally by a Fisher & Paykel Authorised Repairer.
Dryer wall mounting instructions
Fig. 12 Wall mounting instructions
Ensure bracket is securely
fastened at both ends
into studs capable of
supporting at least 108 kg.
Fit timber slats if necessary
(refer to page 9).
Ceiling
70 mm
Bracket holes
For the average
person the
recommended
height for the
bracket is
2070 mm from
the floor
Fit inverted control panel over
the existing panel if necessary
(
AeroSense™
model only)
Fit spacers
as shown
Floor
519 mm
0 100 mm
WALL VENT HOLE
20 mm 104 mm
66 mm
66 mm
Ensure the slots are clear of
the half-punched material
before attempting to mount
the dryer onto the wall.
