13
Installation instructions
Important!
■
■
DO NOT use with water that is microbiologically unsafe or of unknown quality.
■
■
WARNING
– connect to potable water supply only.
■
■
DO NOT
install on line pressure above 827 kPa (119 psi) or below 150 kPa (22 psi).
■
■
DO NOT
use on hot water supply (25°C (77°F) max).
■
■
DO NOT
cut any length of tube shorter than 200 mm (8”).
■
■
DO NOT
install near electrical wires or water pipes that will be in the path of drilling when
selecting the location of the filter system.
■
■
DO NOT
mount the filter in such a position that it will be struck by other items, such as
wastebaskets, etc.
■
■
DO NOT
install the filter or any water tubing in direct sunlight as prolonged exposure to light can
weaken plastic components.
■
■
DO NOT
install the filter in a location that is susceptible to freezing temperatures as damage to
the filter housing could occur.
■
■
DO NOT
screw the filter to the refrigerator.
■
■
DO NOT
install the filter or any water tubing in high temperature areas eg in a ceiling cavity.
■
■
AVOID
contamination of pipes during installation.
■
■
DO NOT
use copper tubing. The plastic tubing supplied should always be used.
■
■
DO NOT
continuously dispense water for a period longer than 2 minutes.