Items needed:
1 -‐ Assembled Boat
2 -‐ 7’ 2-‐Piece Oars
2 -‐ Oar Stops
2 -‐ Small Oar Locks
2 -‐ Split Rings
1 -‐ Phillips Screwdriver (not included)
The 7’ 2-‐piece oars come with pre-‐installed oar sleeves.
1. Insert the Small Oar Locks in the oar stands and secure with the split rings.
2. Assembly both 7’ 2-‐piece oars.
3. Fit the oar stops onto the oar sleeves.
4. To achieve the proper posiNoning of the oars, there should be about 3” to 4” between the oar grips at their closest
posiNon. The distance from the end of the oar handle to the oar stops should be same for both oars.
5. Once the posiNon has been determined, Nghten the bolts using the Phillips screwdriver.
Oar installaNon:
Anchor InstallaNon:
Items needed:
1 -‐ Assembled Boat
1 -‐ 12 Pound Anchor & Rope (Not included)
1. Tie one end of the rope onto the anchor using a secure knot. Next, thread the free end of the rope through pulleys 1 & 2,
located underneath the motor mount.
2. Insert the rope between the bracket and pulley 3.
3. Feed the rope underneath the cargo deck and seat bar. (Cargo deck and seat are removed for illustraNon purposes) Insert
the rope between the bracket and pulley 4.
4. Secure the rope in the rope cleat.
