FISCHER MS13, Operating Manual

Page: 23 / 32

FISCHER Mess- und Regltechnik GmbH Commissioning | 3
BA_EN_MS13 23 / 32
Parameter name Description Value range
Software Info Information about the software Device type, serial
number, firmware
version
Config Info Information about the configur-
ation Basic measuring
range, output signal,
contacts
Key numbers Key numbers Operating time,
switch cycles of the
contacts
Password Password 0/1…999
Load config. Load configuration
Save config Save configuration
The user menu can be switched to German, English, French, Spanish, Italian,
Portuguese or Hungarian using the parameter
Language .
The menu items Software - Info and Config - Info provide information about
the device. This information helps to answer questions about the device quickly.
• The device type, controller ID and the firmware version is shown in the soft-
ware info .
• The basic measuring range, the defined output signal and existing contacts
are stated in the Config Info .
The Statistics provide information about the operating time and the relay
switching cycles from the time of delivery. The operating time is shown in days
(d) and hours (h)
A
Password can be used to protect the menu against unauthorised access.
The password is a figure from 1 to 999. The input 0 means that no password is
active.
The password needs to be set if the user presses the button in normal mode to
enter the menu. If a wrong password is entered, the system automatically jumps
back to normal mode again. If no password is active, the display immediately
jumps to the menu.
NOTICE
Forgotten password
The user cannot restore a forgotten password. Please contact the manufacturer
in this case.
The user can load a saved configuration via the menu item Load config . This
means that a functional set of parameters can be loaded after trying out various
settings.
The menu item
Save config. serves to save the existing parameters in a pro-
tected memory area. This is helpful if the settings of a functional device needs
to be optimised.
Save config. and Load config. can be used to quickly restore
the initial status again.
NOTICE
Delivery condition
If the user has not yet saved a configuration, the default values (status on deliv-
ery) are loaded. In this case, any measuring range spreads or switch points are
reset and the device needs to be newly configured.