FISCHER FGW 90F, User Manual

Page: 33 / 448

33
The dust filter at the back of the tool can be removed for cleaning
or to interchange it with a new one when dirty. To release the cover
of the dust filter use a screwdriver or anything similar and push
it into the slot at the bottom of the cover. Rotate the screwdriver
downwards to release the cover and take the dust filter out. Clean
the dust filter with pressurized air. Do not use water or oil to clean
the filter. After the cleaning, put back the dust filter the same way it
has been taken out and put on the cover again by pushing it back
into lock position.
4.5 Dust filter
Open the fuel cell cover by pulling the door
and rotate. The fuel cell cover needs to be
fully opened to be able to insert the fuel
cell. Close the door again after inserting
the fuel cell.
4.6 Fuel cell compartment cover
The hook can easily be adjusted to the use as belt or rafter hook.
To do this, remove the battery and turn the hook to the desired position.
4.7 Belt or rafter hook
EN