FISCHER FGW 90F, User Manual

Page: 32 / 448

32
Long nose piece =
reduced setting depth
The wheel for depth adjustment can be used to reduce the depth and choose how to set the nails –
flush or fully embedded. In the short setting of the nose piece, the nails are set deep. By using the
wheel to extend the nose piece, the setting depth of the nail will be reduced.
4.2 Wheel for depth adjustment
Short nose piece =
large setting depth
The tool is equipped with a magazine with an angle of 34°.
The nail capacity of the magazine is 60 nails.
4.3 Magazine
After inserting the battery into the tool, the LED lights indicate the battery power and the status of
the tool.
4.4 Indication of battery-LED status
Status Meaning
All three LEDs lights green The tool is ready, and the level of capacity is between 100% and 60%
Two LEDs lights green The tool is ready, and the level of capacity is between 60% and 30%
One LED light green The tool is ready, and the level of capacity is between 30% and 10%
One LED is flashing green The tool is ready, and the level of capacity is between 10% and 5%
One LED light red The tool is ready, and the level of capacity is below 5% and should be
recharged soon
All three LED lights flash red The tool has some issue and should not be used anymore,
see troubleshooting (chapter 9) to get the tool working again
EN