FISCHER 606-032 Operator'S Manual Download

Page: 6 / 40

MMS

Inspection DPM High

Safety information

Potentially explosive environment

The gage and accessories are

not

suitable for use in potentially explosive

environments.

►

Operate the gage and accessories only outside of potentially explosive

areas!

1.3 Safety of the electrical equipment

Only accessories approved or recommended by the manufacturer may be con-

nected to the gage!

USB cable

Damaged USB cable

Kinking or pinching the USB cable can result in a broken wire. Data trans-

mission is then no longer possible.

►

Connect only an undamaged USB cable with a max. length of 3 m to the

gage.

►

Always coil up the USB cable for storage.

Batteries/rechargeable batteries

•

Use the following alkaline or lithium battery type: Mignon, 1.5 V, LR6 -

•

Use the following NiMH rechargeable battery type: Mignon, 1.2 V, HR6

- AA

Servicing and repairs

Modifications, repairs as well as maintenance and service work on the gage

and accessories may be carried out only by service personnel authorized by

the manufacturer.
Exception: Changing the batteries/rechargeable batteries.

Summary of Contents for 606-032









































Search results

Summary of Contents for 606-032

Reviews:

Related manuals for 606-032

Brands by name

Popular brands

FISCHER 606-032, Operator'S Manual

Search results

Summary of Contents for 606-032

Reviews:

Related manuals for 606-032

Brands by name

Popular brands