FISCHER 606-032, Operator'S Manual

Page: 11 / 40

MMS
®
Inspection DPM High 7
Description
2.5 Gage concept
In order to measure, a batch (file) must be created in the gage for each mea-
suring application. A description of the expressions can be found in Chapter
"Glossary".
The key contents of the batch files and calibration file are shown schematically
in the figure below:
A measuring application is defined in the gage by a batch file
More Settings > Measurement units (for new batch)
Resolution of the measurement
reading display (for new batch)
Battery Type
Probe Settings > Raw data from probe
About > Information about software version
and probe as well as legal informa-
tion such as copyright, data protec-
tion conditions, enhanced labeling
Measuring application 1
Batch 001
(settings)
•
Specification limit monitor-
ing/alarm settings
•
Measured reading view,
decimal places for the mea-
sured reading
•
Unit of measurement
•
Log interval
Gage
Batch 002
(settings)
•
Specification limit monitor-
ing/alarm settings
•
Measured reading view,
decimal places for the mea-
sured reading
•
Unit of measurement
•
Log interval
Batch 003
(settings)
•
Specification limit monitor-
ing/alarm settings
•
Measured reading view,
decimal places for the mea-
sured reading
•
Unit of measurement
•
Log interval
Measuring application 2 Measuring application 3