Fischer Panda 5000i PVK-U, Manual

Page: 137 / 174

General operation
30.10.12 Chapter 10: General operation - Page 137
Fig. 10.2-2: Set-up menu
With the cursor-up and cursor-down buttons, you can navigate
through the menu. The currently selected menu item is marked
with two asterisks (*), e.g. "backlight 2":
Set-up menu with item highlighted: *backlight 2*
Note:
The Start/Stop button is used for confirming a selection in the
set-up menu. If you confirm the row marked with the * with the
Start/Stop button, you will access the selected sub-menu.
Fig. 10.2-3: Set-up menu
Set-up menu
10.2.2 Setting the brightness of the backlight ("backlight" and "dimtime")
The brightness of the display backlight of the Panda iControl2 panel can be varied in ten increments (0-9). Also, the
display can be dimmed with a timer if no button is actuated on the control panel for a parameterisable period. To
adjust the default brightness and the dimmed brightness, the set-up menu offers the items "backlight 1" (default
brightness) and "backlight 2" (dimmed brightness). These service menu screens are highlighted with the light bulb
symbol:
The period after which the backlight is to switch to the dimmed level can be specified with the menu item "dimtime".
In this screen, you can enter the time in seconds, values between 0s and 255s are
possible.