9
STEP 3:
Exit the vehicle and close the door. The vehicle’s doors will lock/arm and then engine will shut
down. If the vehicle’s engine does not shut off, your door trigger may not be functioning properly.
Discontinue use of the remote start feature and take your vehicle to a local authorized Firstech dealer for
service.
When the vehicle shuts off, your system is in reservation mode and is ready to safely remote start.
IMPORTANT:
By default, the system will lock/arm the vehicle upon setting reservation mode. Take care
to not lock your keys inside the vehicle.
Cancelling Reservation Mode
Reservation mode will be cancelled for the following reasons;
•
The FT-DAS is not installed and/or configured correctly.
•
You did not activate the parking brake prior to turning off the ignition.
•
You pressed the foot brake after the key was removed from the ignition.
•
You released the parking brake after the key was removed from the ignition.
•
You entered valet mode, opened the vehicle’s door, hood, trunk or set off the alarm.
Reservation Mode Settings
Reservation mode settings can be programmed by your authorized dealer
.
Option 1:
Locks doors before Reservation Mode is set.
Option 2:
Hold Key/Start button to initiate Reservation Mode.
Option 3:
Reservation mode sets 10 seconds after the last door is closed, as opposed to immediately.
This option will allow you to access the vehicle’s rear doors, trunk or hatch prior to the system setting
reservation and passively locking/arming.
Option 4:
Locks doors after Reservation Mode is set.
Trunk Release
Hold button
for 2.5 seconds to release the trunk or hatch. If you are in range, the remote will beep
twice and the LED’s will flash, indicating that the trunk release command has been successfully
transmitted.
IMPORTANT:
Trunk release is an optional vehicle feature that may require additional parts and labor.
Auxiliary Outputs/Window Roll-Down/Sliding Doors
Your system is equipped with two additional outputs that can be configured to control windows, open
power sliding doors, open a power sliding moon roof, or even turn on a rear defroster. These outputs can
be configured for pulsed, timed or latched settings. Your authorized dealer can set these outputs up
accordingly. Using auxiliary outputs to control additional vehicle functions will require additional parts and
can be rather labor extensive.
Tap button
for a half second to trigger auxiliary output 1. Tap button
for a half
second to trigger auxiliary output 2. The vehicle’s parking lights will flash once and/or siren chirp
once indicating that the auxiliary outputs have been triggered.
By default, the system is in Secure Auxiliary Mode, which requires you to hold buttons
for 2.5 seconds prior to triggering auxiliary 1 or 2. To turn off secure auxiliary, please contact your
authorized Firstech dealer.
Silent Arm/Disarm
