6
Remote LED Functions
Your remote will communicate to and from your vehicle while in range. The unique icon LED design will
display LED’s indicating lock/unlock status, remote start confirmation, remaining run time and much
more.
1 Way Remote Button Functions
Button
Duration
Additional
Programming
Required
Function / Description
Half second
no
Locks doors and/or arms alarm.
3.5 seconds
no
Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn).
Half second
no
Unlocks doors and/or disarms alarm.
Half second
no
Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window
roll-down).
2.5 seconds
no
Trunk release. Triggers the trunk release output and opens the vehicle’s trunk.
Half second
no
Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window
roll-down).
2.5 seconds
no
Activates the remote start. Repeat and remote start will shut off.
Half second
no
Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the
alarm is triggered).
2.5 seconds
no
Option programming menu 1 - Installers Only.
Half second
no
Valet Mode (see Valet Mode Section for details)
2.5 seconds
no
Turns the shock sensor on/off. (Alarm or Alarm/Starter systems only)
Half second
yes
Drive lock. Activates ignition controlled door locks.
Event
LED Icon
LED Duration
Chirp(s)
Runtime Remaining:
100 Percent
Once every 5 seconds
Five times
Runtime Remaining:
75 Percent
Once every 5 seconds
N/A
Runtime Remaining:
50 Percent
Once every 5 seconds
N/A
Runtime Remaining:
25 Percent
Once every 5 seconds
N/A
All command
confirmations
Once or Twice depending on function
Once or Twice
depending on function
All error
confirmations
The icon LED’s will blink according to
which button(s) caused the error.
Three chirps
Low Battery Warning
Fade
