Advanced System Functions
Please see your place of purchase to activate this feature.
The optional Secure Valet Switch prevents the alarm from being put into valet mode through cycling the ignition on/off five times. The Secure Valet
Switch is more secure than traditional toggle / valet switches because it requires a two digit code.
IMPORTANT: The first two digits of the RPS unlock/disarm pass code will be the default pass code for the secure valet – you do not need to
program them independently. If you are not using the RPS unlock, following the below procedures to program your secure valet pass code;
STEP 1: Turn on Option 3-10-III. (Dealer programmed option)
STEP 2: Turn ignition key to the “on” position.
STEP 3: Hold down the valet switch for 1.5 seconds. The LED on the valet switch will begin to flash rapidly with successful completion of this step.
STEP 4: Enter the first digit of the desired two digit pass code by depressing the switch the number of times that coordinates with the desired first
number. For example, to enter 3, depress the switch 3 times, then wait.
STEP 5: The LED will confirm the first number by flashing BLUE slowly. Once the LED begins to flash rapidly, enter your second number by repeating step 4.
STEP 6: Turn the ignition off - the Secure Valet Switch is now programmed. Follow steps 3 – 5 to enter your Secure Valet code.
Secure Valet Switch
Please see your place of purchase to activate this feature.
Timer start mode is used to cool or warm the vehicle automatically without use of the key or the remote. While engaged, timer start will
activate even while the remote is out of range. Tap buttons simultaneously for a half second to activate timer start mode. The
remote will beep once and Timer icon illuminate. Repeat the same step to turn off timer start mode. Timer start mode will be cancelled
any time the vehicle is started manually or remotely
Timer Start Mode
By Firstech, LLC 32
33 By Firstech, LLC
Advanced System Functions
Please see your place of purchase to activate this feature.
Cold/hot start mode works in conjunction with timer start mode (see above) and the temperature sensor. It allows you to configure your timer start
feature to check the vehicle’s temperature prior to starting.
Cold/Hot Start Mode
FT-2WLCD-S-E_UserGuide.indd 33-34
2011-6-10 12:05:46
