Firstech Compustar 2W704R-SH User Manual Download Page 18

Anti Jacking Mode

Please see your place of purchase to activate this feature. 

Your system has a mode that requires you to keep your remote separate from your key chain. This feature also requires additional labor. Please 
consult your installer for more details. The Anti Jacking mode allows you to safely disable your vehicle once a thief has driven off with your property. 
If you are car jacked and still have your remote, you can panic the system by holding button           down for 3.5 seconds. The siren will sound for 30 
seconds and the vehicle will shut down.

Advanced System Functions

More Optional Sensors

If you purchased an Alarm or Alarm and Remote Start system you have the ability to add optional sensors from Firstech. You have the ability to 
protect your investment by adding a battery back up system to protect main power to your alarm or a tilt sensor to protect expensive rims and tires.

By Firstech, LLC         34

35         By Firstech, LLC          

Remote Coding / Programming Routine

Programming 2 Way 4 Button Remotes: 

STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc & On positions) five times within 7 
seconds. The vehicle’s parking lights will flash once with the successful completion of this step.

STEP 2: Within 2 seconds after cycling the ignition for the 5th time, tap the Lock button         on 2 way remotes or the (lock) button on 1 way 
remotes
 for a half second. The parking lights will flash once to confirm the transmitter has been coded.

Exiting Programming:Programming is a timed sequence. The parking lights will flash twice signaling the end 
of programming mode.

Programming Multiple Remotes: After the confirmation flash given in step 2, code additional remotes by 
pressing Lock button on 2 way remotes or the (lock) button on 1 way remotes. The parking lights will flash 
once confirming each additional remote. All systems can recognize up to three remotes.

IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time.

FT-2WLCD-S-E_UserGuide.indd   35-36

2011-6-10   12:05:47

Summary of Contents for Compustar 2W704R-SH





















Reviews: