25
8.5. Loading the oven
Warning - when the chamber is at its working temperature the
glass and metal parts of the door and some of the surrounding sections
reach temperatures which are dangerous for the human body. These
parts are identified with the symbol
,which warns of the risks.
8.6. PROGRAMMING
8.6.1. Programming the clock
The programming of the clock can be carried out only when the
equipment is in position 1 (with the display reading OFF). When you
press the temperature button and keep it pressed down for at least 3
seconds the displays show
the time figures flashing.
Using the and buttons the user can change the time as he wishes.
To put the new hour setting into memory press (within 5 seconds) the
temperature/time button a second time and the display relating to the
hour will stop flashing (value memorised).The flashing shifts to minutes
which can be changed by following the same procedure as for the
hours.
Pressing the temperature/time button to memorise the new minutes
value, you will fix all four displays which will thus show the memorised
time new value ( N.B. the value of the seconds will always be set a
naught) and the luminous point for the second starts to flash.
After memorising this, the displays
go off again. If by change the
current should go off during the programming ( at the moment of
switching on again) the system will display the last value which was in
memory.
