First Alert SFA3800, User Manual

Page: 11 / 20

E-10
telephone line.
Note:
It is possible to switch from a handset conversation to a speakerphone conversation by pressing the BUTTON
and replace the HANDSET to the HANDSET CRADLE accordingly.
PRE-DIALING A PHONE NUMBER
1. Enter the telephone number on the KEYPAD. The telephone will voice the digits dialed (with Voice Prompt
ON and set to either English, Spanish, Italian or French).
2. To modify a number, press the DELETE BUTTON for each digit to be corrected.
3. Pick up the HANDSET, press the DIAL BUTTON or press BUTTON.
RECEIVING A CALL
When you receive a call, the telephone rings and the RINGER INDICATOR flashes. The LCD DISPLAY will show
the CALL# and the caller telephone number if you have subscribed to Caller ID. The telephone will say the name
of the caller if the number matches a name saved in the phone book, if not, it will say the number of the calling
party.
This feature allows you to decide to pick up the phone or not depending on who is calling.
If you want to talk to the caller:
1. Pick up the HANDSET or press BUTTON to answer the call.
2. At the end of the call, return the HANDSET to the cradle or press BUTTON again.
SPEAKER VOLUME CONTROL
You can adjust the speakerphone volume to the desired listening level using the SLIDE VOLUME CONTROL.
REDIAL
To redial the last number called:
1. Lift the HANDSET or press BUTTON.
2. Press the REDIAL BUTTON.
Note : The last number dialed manually (up to 32 digits long) can be redialed.
PAUSE
You can insert a 3.6 second pause while dialing or storing a number into memory in order to access custom and
telebanking services, long distance, etc. Press REDIAL BUTTON at the desired point within the number and a “P”
will be inserted. Press REDIAL BUTTON again if an additional 3.6 second pause is needed.
CALL WAITING (
subscription to Call Waiting service may be required)
Many special telephone services, such as Call Waiting, require a switch hook signal.
If you have Call Waiting service, you can put a call on hold and take a second incoming call on the same line by
pressing CALL WAITING BUTTON. Press CALL WAITING BUTTON
again to alternate between the two callers.
Note: If you do not have any special phone services requiring a switch hook signal, pressing CALL WAITING
BUTTON may disconnect the current call.
MUTE
Press and hold the MUTE BUTTON so that the person on the other end of the line will not hear what you are
saying. You can continue to hear the person on the other end.
1.
Press and hold the MUTE BUTTON to mute the call.
2. Release the MUTE BUTTON and you will be able to continue the conversation.
HEARING AID COMPATIBILITY (HAC)
This unit is compatible with inductively coupled hearing aids and cochlear processors. Adjust your hearing aid’s or
processor’s “T-switch” to the “T” position.