manualshive.com logo in svg

First Alert NVR1640, User Manual

Share
Download
First Alert NVR1640 User Manual Download Page 31

Page  31

RECORDING AND CAPTURE SETTINGS

Check the storage mode of the HDD: Menu > HDD > General.

1. Click Advanced

2. If HDD mode is Quota: Set maximum record capacity and 
maximum picture capacity. If HDD mode is Group: Set the 
HDD group. 

Configure parameters to define image quality including 
transmission stream type and resolution. Enter the Record 
Settings interface to set recording parameters: 
Menu > Record > Parameters > Record. 

1. Configure parameters according to table below. 

2. Click Apply.

  Configuring Parameters

To set sub-stream parameters, enter sub-stream tab page. 

1. Use the dropdown lists to set each parameter. 

2. Click Apply.

Before you start

Make sure the HDD has already 
been installed and initialized.

To set parameters for capture, click Capture.

1. Use the dropdown lists to set each parameter. 

2. Click Apply.

S

etting

F

unction

Pre-Record

Time set to record before a scheduled event

Post-Record

Time set to record after a scheduled time or event

Expired Time

The longest time for a record file to be kept in the HDD 
before deleting. “0” will keep a file from being deleted.  

Redundant Record / Capture

Enable to save record and captured picture in redundant HDD

Record Audio

Enable / Disable audio recording

Video Stream

Choose between main stream or sub-stream (Sub-stream 
allows longer record time with the same storage space)

NOTE:

The interval is the time period between two capturing 

 

actions. You can configure all the parameters on this 

 

menu on your demand.

NOTE:

Redundant HDD must be 

 

configured in HDD settings 

 

prior to use.

NOTE:

Main stream parameters 

 

are read-only. 

Summary of Contents for NVR1640









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands