- 14 -
Windows Hot-Swap Procedure
Hard drives may be hot-swapped under Windows 2000, Windows XP, and Windows 2003.
Note: Hot-swap functionality is not available for Windows 98/98SE/ME; please shut down the
system before adding or removing hard drives when using these operating systems.
Caution
: To prevent loss of data, save your work and close associated applications and
directory folders before removing the external hard drive (applications need to be closed
since they may keep temporary working files open on the external hard drive).
Hot-Swap Procedure
♦
Bring up the Windows Device Manager: Right -click on
My Computer
, click
Manage
,
and then click
Device Manager.
♦
Go to
Disk Drives
and find the disk you want to remove.
♦
Right click on the desired disk drive and select
Remove/Disable.
♦
After performing this operation, you can remove the hard drive without risk of losing
any data that is currently stored in cache memory.
♦
To reconnect the external hard drive, reconnect it and Windows will automatically
detect it.
♦
If you are re-attaching a hard drive after the remove/disable operation as explained
above, you must make sure that the hard drive is power cycled before reconnecting it
(Removing, waiting a few seconds, and reinserting the hard drive into the
SeriTek/1EN2 external enclosure will effectively power-cycle the drive. If both drives
were removed/disabled, then the external enclosure itself may be power-cycled).
