FB755AC & FB755AS Version 1.0.3
- 21 -
2
Status Value
: Output the status value with the form of message.
3
Status of Command Language
: Since the preliminary operation method is to use AT command, the
progressed AT command language will output in the form of message.
1
READ STATUS Button
: To read in the PC configuration set in the product.
2
WRITE STATUS Button
: To store the value set in the PC configuration window into the product
3
Factory Setup Button
: To reset all the PC configuration value to the factory set value.
<Figure 8-4 : config tool Device Configuration >
(7) To summarize the setting up the config tool, follow the procedures as under.
- To strore the set value upon completion, please be sure to click WRITE STATUS button.
- Click READ STATUS to read in the stored configuration value to certify the they are correct or
not.
- If you want to set as the status first received, click Factory Setup to reset the first received
value.
- Since the config tool was made based on AT command of the product, it is possible to
represent the ongoing command language and its status at the form of status value and
message window.
Note : Please refer to Appendix PC Configuration for detailed explanation.
