FB755AC & FB755AS Version 1.0.3
- 19 -
<Figure 8-1 : config tool main Display>
(4) Select “CONNECT”(<Figure 8-1> Blue Lined) on the main display.
1
Select Product
: Name of Product in Use
2
DEBUG CHAR
: Default is 0x02. (Appendix : Refer to details of PC Configuration)
3
Set Serial Port
: Default is BAUD RATE : 9600, PARITY BIT : None, STOP BIT : 1
<Figure 8-2 : config tool CONNECT Display>
(5) When the <Figure 8-2> appears, select each selective item of red lines box 1~3, then
press connect (red box line 4) which will change Serial connection, Ready To Set (red lined box
1) into Green as shown on <Figure 8-3>.(The selected value will be certified at the
preliminary setting of product.)
If the color does not change into green, please make sure of the Baud rate of product and re-
execute the config tool.
