background image

 

© 2022 Carrier 

14

Fireye, Inc. 

 

CU-124

3 Manchester Road 

 

May 23, 2022

Derry, New Hampshire 03038 USA 

 

 

Fireye.com

ACCESSORIES AND SPARE PARTS (continued)

- Order No.:  

HE-S

 

Replacement ignition tip, screwed in 200 mm long

- Order No.:  

HE-L

 

Replacement ignition tip, screwed in 675 mm long

- Order No.:  

ET 0.0X

 

Extension tube (see technical data for selection of different lengths)

- Order no.:  

HEP-2-CLIP

 

PE - compensation line

NOTICE 

When Fireye products are combined with equipment manufactured by others and/or integrated into systems designed or 

manufactured by others, the Fireye warranty, as stated in its General Terms and Conditions of Sale, pertains only to the 

Fireye products and not to any other equipment or to the combined system or its overall performance.

WARRANTIES

 

FIREYE guarantees for one year from the date of installation or 18 months from date of manufacture of its products to 

replace or repair (Fireye’s option) any product or part thereof (except lamps and photocells) which is found defective 

in material or workmanship or which otherwise fails to conform to the description of the product on the face of its sales 

order. THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES AND FIREYE MAKES NO WARRANTY 

OF MERCHANT-ABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED. Except as specifically stated 

in these general terms and conditions of sale, remedies with respect to any product or part number manufactured or sold 

by Fireye shall be limited exclusively to the right to replacement or repair as above provided. In no event shall Fireye be 

liable for consequential or special damages of any nature that may arise in connection with such product or part.

Summary of Contents for HEP-2















Reviews: