background image

 

2

 

ORDERING INFORMATION

 

PART NUMBER

DESCRIPTION

 

MBUV-100D

Ultra-violet FlameWorx module, dual channel - DIN rail mount.

MBIR-100D

Infra-red FlameWorx module, dual channel - DIN rail mount.

MBUVS-100D

Ultra-violet self-check FlameWorx module, dual channel - DIN rail mount.

MBFR-100D

Flame rectification FlameWorx module, dual channel - DIN rail mount.

 

Note

 

: Wiring base for flame switch modules must be ordered separately.

 

Power Supplies

 

MBLPS-100D

Power supply (120 VAC input power) for flame switch modules - DIN rail mount.

MBHPS-100D

Power supply (120 VAC input power) for flame rods, UV and UV Self check flame scanners- DIN rail mount.

MBLPS-200D

Power supply (230 VAC input power) for flame switch modules - DIN rail mount. 

MBHPS-200D

Power supply (230 VAC input power) for flame rods, UV and UV Self check flame scanners- DIN rail mount.

 

Note

 

: Wiring base for power supplies must be ordered separately.

 

Wiring Bases

 

60-2537

Wiring base with sixteen (16) straight style screw terminals (22-14 AWG, 0.5 - 1.5 mm 

 

 

) for all DIN rail mount 

flame switch modules.

60-2538

Wiring base with twelve (12) straight style screw terminals (22-14 AWG, 0.5 - 1.5 mm 

 

 

) for all DIN rail mount 

power supplies.

 

Mounting Rails

 

60-2539-12

DIN style mounting rail - 12 inches. Will mount up to 4 modules.

60-2539-24

DIN style mounting rail - 24 inches. Will mount up to 8 modules.

60-2539-36

DIN style mounting rail - 36 inches. Will mount up to 12 modules.

 

Flame Scanners

 

UV1A3

Ultra-violet scanner for use with MBUV modules. 1/2" NPT mount. 3' flex conduit.

UV1A6

Ultra-violet scanner for use with MBUV modules. 1/2" NPT mount. 6' flex conduit.

UV2

Ultra-violet scanner for use with MBUV modules. 3/8" NPT mount. 3' flex conduit.

UV8A

Ultra-violet scanner for use with MBUV modules. 1/2" NPT mount. 90 head, 6' cable, no conduit.

45UV3-1050

Ultra-violet scanner for use with MBUV modules. 3/4" NPT mount, w/ 4-314-1 UV tube.

45UV5-1007

Self-checking ultra-violet scanner for use with MBUVS modules. 1” BSP mount (230 VAC).

45UV5-1008

Self-checking ultra-violet scanner for use with MBUVS modules. 1" BSP mount (120 VAC). 

45UV5-1009

Self-checking ultra-violet scanner for use with MBUVS modules. 1" NPT mount (120 VAC). 

48PT2-1003

Infra-red scanner for use with MBIR modules. 1/2" NPT mount, straight head, 8' cable.

48PT2-1007

Infra-red scanner for use with MBIR modules. 1/2" NPT mount, straight head, 4' cable. 

48PT2-9003

Infra-red scanner for use with MBIR modules. 1/2" NPT mount, 90

 

°

 

 head, 8' cable.

48PT2-9007

Infra-red scanner for use with MBIR modules. 1/2" NPT mount, 90

 

°

 

 head, 4' cable. 

48PT2-9007W

Infra-red scanner for use with MBIR modules. 1/2" NPT mount, 90

 

° 

 

head, 4' cable, water repellant.

45CM1-1000

Photocell (with filter) for use with MBFR modules. 1/2" NPT mount. 

45CM1-1000Y

Photocell (without filter) for use with MBFR modules. 1/2" NPT mount. 

69ND1-1000K4

Flame rod for use with MBFR modules. 1/2" NPT mount, 12" length.

69ND1-1000K6

Flame rod for use with MBFR modules. 1/2" NPT mount, 18" length.

69ND1-1000K8

Flame rod for use with MBFR modules. 1/2" NPT mount, 24" length.

Summary of Contents for FlameWorx MBFR-100D













Reviews: