Proprietary and Confidential
Sequence of operation
25
Auto state
LED STATE
After timing t5 ends, the control transitions from MTFI to
AUTO. In auto, the actuator is no longer commanded by the
BurnerPRO and can modulate or mode independently if
needed to maintain the connected load.
The control will remain in auto until there is no longer a call
for heat (loss of voltage on terminal 5) or if there is a lockout
condition.
Summary of Contents for BurnerPRO
