IT
GB
DE
FR
ES
- 24 -
C13961
6702.
fm
English
Important
This adjustment must
be made with the well
completely raised.
To carry out this operation,
proceed as follows.
1 - Undo the screws
(C)
and remove the control
panel
(D)
.
2 - Undo the screws
(E)
to remove the lid
(F)
.
3 - Undo the screw
(G)
.
4 - Position the microswitch
(H)
so that it is
touching the bracket
(L)
.
5 - Tighten the screw
(G)
.
6 - Fit the lid
(F)
and secure it with the screw
(E)
.
7 - Replace the control panel
(D)
on completion of
the operation.
8 - Raise and lower the well to check that the set-
ting is correct.
ADJUSTING THE WELL "FULLY RAISED" MICROSWITCH
To carry out this operation, proceed as follows.
1 - Fit the spanner
(A)
onto the hexagon
(B)
.
2 - Keep a firm grip on the spanner
(A)
and undo
the locking screws
(C)
.
3 - Turn the spanner
(A)
clockwise to load the
spring or anti-clockwise to release it.
4 - Once the correct balance is obtained, screw in
the screws
(C)
without tightening them fully.
5 - Use the spanner
(A)
to turn the shaft until it is
located in one of the seats provided.
6 - Fully tighten the screws
(C)
.
ADJUSTING THE LID COUNTER-BALANCING
IDM-39616701000.tif
D
C
C
D
IDM-39616201500.tif
E
F
G
L
H
IDM-39615401800.tif
B
A
C
IDM-39616301600.tif
B
A
C
Summary of Contents for 191BR2EA
Page 2: ......
