USE AT LEAST
3 WIRE TIES
AS SUPPLIED
THROUGH HOLES
ON DEADFRONT
WIRE TIE
IN 2 PLACES
TO BACK OF
ENCLOSURE
DRESS WIRES NEAR
TOP OF ENCLOSURE
CLEAR OF ADDER
MODULES
Page 15 of 36
Fig.10:
General Field Wiring Considerations
7.0 FIELD WIRING
7.1 GENERAL FIELD WIRING CONSIDERATIONS
Because most of the Field Wiring is to the Main Board on the swinging DeadFront, it is very important to properly dress
the wires so as not to place stress on either their connection to the boards, or running to conduit. The Figure below
shows the required wiring techniques.
