3
Ra
dio
1
Ra
di
o
2
HotPoint 5200 access point setup
Before you install an access point outside, you need to make sure:
•
The parts are all in the box.
•
Attach the cables and antennas for testing.
•
Make an initial connection from a laptop that is running the web interface or
HotView Pro so you can make sure the device works as expected.
Verifying the box contents
The box contains these items:
•
One HotPoint 5200 access point
•
One power cable (USA type)
•
One Power over Ethernet (PoE) injector
•
Six dual-band 2.4 GHz and 5 GHz, 3 dBi omni-directional staging antennas
•
Six SMA to type-N plug adapters
•
One Ethernet cable
•
One field-installable Ethernet connector
•
Mount kit
•
Quick Start Guide
If any of these items is missing from the box, call your reseller for help.
Parts of a HotPoint access point
The next picture shows the radios, LEDs and connectors on the access point.
LEDs: 2.4 GHz 5 GHz Power
1
1
2
2
3
Reset button
Ethernet port
Ground screw
3
DC power connector
