2
6200-002
REV. A
04.16.2009
www.fireplaces.com
Before
Before
Before
Before
Before
you star
you star
you star
you star
you starttttt
The walls and floor in the area of the installation should be clean, plumb and
level. Any major deviation should be remedied before installing the fireplace,
marble or the mantel /cabinet.
a. Is base molding already installed?
b. Where are the electrical outlets or firebox switch?
c. Is there enough distance between windows and edge of cabinet?
d. Is the fireplace centered between walls?
e. Return air vent location?
f. Is the fireplace centered between windows?
g. Where are the electrical & cable outlets positioned?
h. Is there hardwood or carpet going in?
Above is a diagram of issues that may prevent an installation of wood products around a firebox:
Parts List and Diagram
MANTEL PARTS:
1 Top assembly
(a)
1 Left leg assembly
(b)
1 Right leg assembly
(c)
3 Left, right, top scribe molding
(d)
1 Hearth base (optional)
(e)
8 Cams (installed)
(f)
4 Double head pins
(installed)
(g)
4 Wooden dowels (installed) (h)
4 16D Finishing nails (not shown)
9 4D Finishing nails (not shown)
f
g
h
Tools and supplies needed:
- #2 Philips screwdriver
- Carpenter’s level
- Tape measure, pencil
- Construction adhesive
- Shim material
- Portable drill
- 1/16” and 3/32” drill bits
- Flat head screwdriver
- Hammer
- High temp. silicon adhesive
- Stud finder
- nail set
