Optional Equipment
25
©Travis Industries
10/2/2019 - 1516
36 Elite Owner’s
Summer Fan Switch
The summer fan switch allows the blower on the Fireplace Xtrordinair to be turned on when the
fireplace is cool. This allows the owner to turn the blower on during the summer to push cool, fresh
air into the home for cooling purposes.
1
Turn off the power to the Fireplace Xtrordinair by shutting off the breaker switch that supplies power
to the fireplace.
2
Remove the old blower switch assembly by unscrewing the two screws that hold it in place (use a
standard screwdriver). Disconnect the two quick-connects that attach to the blower switch assembly.
3
Behind the fan control plate are the two quick-connects that were detached in step 2 and another two
that will attach to the switch on the summer fan switch assembly. Attach the two male quick connects
from rheostat on the summer fan switch to the two female quick-connects detached in step 2
(orientation does not matter). Attach the two female quick-connects that lead from the on/off switch
on the summer fan switch to the two male quick-connects behind the faceplate of the fireplace
(orientation does not matter). Attach the summer fan switch to the fireplace by sliding the assembly
in place and replacing the screws removed in step 2.
4
Turn the power back on to the Fireplace Xtrordinair by turning the breaker back on. Test the summer
fan switch by turning the switch on and off with the fireplace cool. The blower should turn on and off.
Firebox
Safety Label
Front View of
Fireplace with
Faceplate
Removed
Black
Exposed
Ground
Wires
Blower
Conduit
Power
Conduit
The switch
plate covers
this area.
Door Switch
White
White
Rheostat
(attached to
swtich plate)
White
Black
Black
Attach these wires to
the switch wires.
Female Quick-Connect
Male Quick-Connect
Attach these wires to
the rheostat wires.