FireplaceXtrordinair 36 DV EFIII Owner'S Manual Download Page 34

P

AGE 

34

W

ARRANTY

TRAVIS INDUSTRIES, INC. warrants the FIREPLACE XTRORDINAIR 36DV fireplace to be defect-free in material and workmanship
for five (5) years from the date of purchase, with the exception of the glass, paint, electrical components, switches, piezo igniter, fans,
gaskets, ceramic logs, ceramic twigs, ceramic coals, moving parts, gas valve, manifold, and burner pan.  This does not include service call
cost or any other additional charges.  Check with your dealer for all costs if arranging a warranty call. The exceptions listed are warranted
for one (1) year from the date of purchase to be defect-free in material and workmanship, with the exception of the glass and paint, which
are not covered by the warranty.

Exclusions to this limited warranty include:  Injury malfunction to the product, loss, damage, defect, failure to function due to accident,
negligence, misuse, improper installation, alteration or adjustment of the manufacturers settings of components, lack of proper and regular
maintenance, damage incurred while the unit is in transit, alteration, or act of God.

This limited warranty excludes damage caused by normal wear and tear, such as paint discoloration or chipping, worn or torn gasketing,
eroded or cracked logs, twigs, coals, etc.  Also excluded is damage to the unit caused by abuse, improper installation, modification of the
unit, drilling of the orifices, or the use of fuel other than that specified on the label attached to the gas control valve (natural gas or propane).

TRAVIS INDUSTRIES, INC.  is free of liability for any damages caused by the unit, as well as inconvenience expenses, material and labor
charges incurred by the removal or reinstallation of any FIREPLACE XTRORDINAIR 36DV unit.  Incidental or consequential damages
are not covered by this warranty.  In some states, the exclusion of incidental or consequential damage may not apply.

This warranty does not cover any loss or damage incurred by the use or removal of any component or apparatus to or from the
FIREPLACE XTRORDINAIR 36DV unit without the express written permission of TRAVIS INDUSTRIES, INC.  and bearing a TRAVIS
INDUSTRIES, INC. label of approval.

Any statement or representation of FIREPLACE XTRORDINAIR 36DV products and their performance contained in FIREPLACE
XTRORDINAIR 36DV advertising, packaging literature, or printed material is not part of this limited warranty.

This warranty is automatically voided if the unit’s serial number has been removed or altered in any way.

Only the original purchaser of an FIREPLACE XTRORDINAIR 36DV fireplace is covered by this warranty.  If the unit is used for
commercial purposes, it is excluded from this warranty.

No dealer, distributor, or similar person has the authority to represent or warrant FIREPLACE XTRORDINAIR 36DV products beyond the
terms contained within this warranty.  TRAVIS INDUSTRIES, INC. assumes no liability for such warranties or representations.

THIS LIMITED WARRANTY IS THE ONLY WARRANTY SUPPLIED BY TRAVIS INDUSTRIES, INC., THE MANUFACTURER
OF THE UNITS.  ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, ARE HEREBY EXPRESSLY DISCLAIMED
AND PURCHASER’S RECOURSE IS EXPRESSLY LIMITED TO THE WARRANTIES SET FORTH HEREIN.

This warranty is limited to the time frame set forth above.  In some states, time limitations on warranties do not apply.

HOW TO USE YOUR FIREPLACE XTRORDINAIR 36DV FIVE-YEAR WARRANTY:  If you find your unit to be defective in
workmanship or material within a 5-year period from the date of purchase contact your local authorized FIREPLACE XTRORDINAIR
36DV dealer.  If your dealer is unable to repair your unit’s defect, he may process a warranty claim through TRAVIS INDUSTRIES, INC.,
including the name of the dealership where you purchased the unit, a copy of your receipt showing the date of the unit’s purchase, and the
serial number on your unit.  At that time, you will be asked to ship your unit, freight charges prepaid, to TRAVIS INDUSTRIES, INC.
TRAVIS INDUSTRIES, INC., at its option, will repair or replace, free of charge, your FIREPLACE XTRORDINAIR DV  unit if it is
found to be defective in material or workmanship within the time frame stated within this limited warranty.  TRAVIS INDUSTRIES, INC.
will ship your unit, freight charges prepaid by TRAVIS INDUSTRIES, INC., to your regional distributor, or dealership.

To register your TRAVIS INDUSTRIES, INC. Five-Year Warranty, complete the enclosed warranty card and mail it within ten (10) days
of the unit purchase date to:  TRAVIS INDUSTRIES, INC., 10850 117th Place N.E., Kirkland, Washington  98033.

OTHER RIGHTS:

This warranty provides you with certain legal rights.  You may have additional rights, which vary from state to state, in regards to this
warranty.

Unit Serial Number

                                                                                                                

Date of Purchase

                                                                                                                

Complete and

Dealer Name and Address

                                                                                                                

save for your

                                                                                                                

records

                                                                                                                

Travis Industries, Inc. reserves the right to change, without notice, product features or specifications described.

10850 117th Place N.E. Kirkland, WA  98033

Summary of Contents for 36 DV EFIII









































Reviews: