Viking AG Wet
7
6. WETBACK
The
Viking AG Wet
is fitted with a wetback to supplement the hot water system.
WARNINGS
:
DO NOT CONNECT TO AN UNVENTED HOT WATER SYSTEM
.
DO NOT USE THIS FIRE WITHOUT WATER RUNNING THROUGH THE
WETBACK.
INSTALL IN ACCORDANCE WITH AS 3500.4.1 OR NZS 4603 AND THE
APPROPRIATE REQUIREMENTS OF THE RELEVANT BUILDING CODE
OR CODES.
For best performance apply the following rules:
1. Keep it simple with the shortest and straightest possible pipe run.
2. The heater should be within 6 metres of the hot water cylinder, the closer the better.
3. The flow pipe from the heater to the cylinder must rise – the cylinder should be at
least 300 mm above the water-booster outlet.
4. Use only 25mm supply and return pipes.
5. Where possible the pipes should be insulated.
WARNING:
Care must be taken to protect the wetback coil and associated pipe work if being
installed in a hard/corrosive water area. Damage caused to the Wetback coil if fitted in
a hard/corrosive water area will not be covered under the manufacturer’s warranty.
Summary of Contents for Viking AG
Page 9: ...Viking AG Wet 9...
