Firenzo Topaz RURAL, Installation And Operation Manual

Page: 6 / 34

Topaz RU Installation - April 2019 6
3B. FLOOR PROTECTOR REQUIREMENTS
HEAT SENSITIVE FLOORS
Dimensions A & B from above diagram must meet the following schedule:
B HEIGHT (mm) A FROM FIRE BREAST
Level Ømm 500mm
30mm 376mm
40mm 355mm
50mm 300mm
Minimum width of floor protector must be 820mm and/or 410mm from centre of Fire.
Before installing your Firenzo Topaz it is important to check the condition of your masonry
chimney. Ensure any cracks are sealed, loose masonry repaired and the chimney swept.
Check the dimensions of your fireplace opening are adequate to accept the new Fire Existing
linings may need to be removed.
The Fire must be installed on a level non - combustible base.
An Insulated Floor Protector
(Hearth) must consist of a
minimum
of 20mm of
Insulation board (Promatech H,
Eterpan LD, Pacbld - Pro or
product of similar thermal
resistance) and tiles/slate or
similar with sealed joints on top
surface to protect from spilt
ash/embers.