Firenzo kompact ag, Installation And Operator'S Handbook

Page: 39 / 45

Kompact RU Installation Version 14/4/14 39
Assembly and Installation Instructions: KOMPACT with SERENITY
Fascia
1. Remove all items from packaging and
separate.
Remove door. Then remove the two 50mm
screws and locate one on each side of the door
1
1
4. Remove the granite ashlip from the fascia
box and fit below the door opening using the
two locator screws at the bottom of the firebox
(Screws for granite ashlip (4) illustration 2).
These two screws protrude by 5mm to enable
the ashlip to be lifted up and over the screw
heads and then screw up tight.
4
Granite ashlip
3
3. Place the four keyhole brackets on the back
of the front plate Serenity fascia over the
protruding screws on the back plate (Screws (5)
illustration 2).
Front plate Serenity fascia
2. Place the single back plate of the fascia
against the firebox.
Replace the 50mm screws (2) in the outer clips
of the fire box securing the backplate.
Secure the top of the backplate with the one
15mm self tapping screw (3).
2
2
2
3
4
5
5
5
5
Air control rod and knob
Serenity door
5. Fit the air control extension rod and the air
control knob.
Finally fit the door. Locate the hinges correctly
by angling the door at approximately 45
degrees.
5