REV. A Page 14
Sanctuary 1 Fire Feature
Section C
All Weather System (AWS)
Preparation
GOE-30VDC Power Supply
Carton Contents
Hardware
Bag
AWS Burner Pan Assembly
This fire feature comes partially assembled and requires
only minimal time to complete. Gas connections are
required after it is installed into the enclosure.
Open carton and remove contents. Inspect for any damage
or missing parts. Hardware bag includes mounting plate,
key valve, key, wires and screws (not shown) in Fig. 18.
Note:
Check for any gas leaks after gas is connected and
turned ON.
The control panel mounts with (4) screws into the side of
the enclosure.
CAUTION:
Use dielectric grease on all wire connections
and ¼” connectors to prevent moisture issues from the
outdoor environment.
These fire pits include a valve and control system that is
certified by Lab Test for USA and Canada to meet ANSI
Z21:.97-2014, CSA C22.2 No 3-M1998 (R2014)
ON
OFF
Fig.
18 Hardware bag contents.
Fig. 17
AWS carton contents.
OUT
Fig.
18A Shows AWS valve box with 2-pin connectors,
brass connections and molex connector.
