REV. A Page 11
Sanctuary 1 Fire Feature
Section B
Thermocouple Manual Safety
(TMSI) Preparation
Fig. 12
Hardware bag contents.
+
-
AAA
Plastic Nut
Red Button Cap
Mounting Plate
Fig. 14
Remove red button cap and install battery into
Piezo ignitor module for operation.
Fig. 13
Shows detail of ground tab wiring for Piezo
underneath the burner pan.
Ratin
g Pla
te
Bottom of Burner Pan
PIEZO48WH
Piezo Ground Tab
PIEZO48WH
PIEZO25WH
Inlet
Outlet
Thermocouple
Piezo
Control
Knob
Carton Contents
Hardware
Bag
TMSI Burner Pan Assembly
This fire feature comes partially assembled and requires
only minimal time to complete. Gas connections are
required after it is installed into the enclosure.
Open carton and remove contents. Inspect for any damage
or missing parts. Hardware bag includes mounting plate,
gas valve, Piezo, wires, battery and screws (not shown)
below in Fig. 12.
Note:
Check for any gas leaks after gas
is connected and turned ON.
The control panel mounts with (4) screws into the side of
the enclosure.
Fig. 11
Carton contents.
