Kalea Bay LED Outdoor Fireplace
REV. B Page 18
Step 6:
Carefully push the LED channel connector through
the wire grommet. As you push it through the grommet sit
the LED channel into the bottom of the glass clip. Ensure
the other end of the channel is also sitting inside the other
retainer clip. See Figs. 20 & 21 as a reference.
Note:
If
you are installing into a see-through fireplace, install the
other LED light strip and channel the same direction.
Fig. 20
Installing LED lights and channel
Fig. 21
LED installed in retainer clip inside fireplace
LED LIGHTING INSTALLATION
Step 5:
Remove the LED right channel assembly from the carton (The front of the channel has a shield facing the front
with the LED wire hanging on the right side). See Figs. 19-21 for details.
Note:
If you are installing into a see-through
fireplace you will install both right and left channels assemblies.
Fig. 19
Shows LED right channel
LE
D C
ha
nn
el
LED Channel
Sits Here
Botto
m En
d
LED Channel Assembly
Installed in retainer clip
